neptunlabs

• owner’s manual 500W Monoblock Subwoofer Amplifier Thank you for purchasing a Total Mobile Audio amplifier for your automotive sound system. Your amplifier has been designed and manufactured to exacting standards in order to ensure years of musical enjoyment in your vehicle. For maximum performance and extended warranty coverage, we highly recommend that you have your new amplifier installed by an authorized Total Mobile Audio dealer. 7) +12dB Input Sens. LP Filter Frequency (Hz) Bass Boost a JL Audio® Company Total Mobile Audio Mounting the amplifier upside down is strongly discouraged.

If mounting the amplifier under a seat, make sure there is at least 1 inch (2.5 cm) of space above the amplifier’s outer shell to permit. • This step is not optional! To the needs of the system. 2) Run power wire (minimum 4 AWG) 13) Install power wire fuse (60A for a single T2-500.1) from the battery location to the amplifier and reconnect the negative battery post terminal. • The low-pass filter in the T2-500.1 is fully variable between 40 Hz and 130 Hz via the “LP Filter Frequency” control knob.

Jl Audio 500 1 Manual 500 1 man ch jl audio 500/1, manual or any aspect of your amplifiers operation. Cub cadet yanmar ex3200 service manual. Manual or any aspect of your amplifier’s operation. JL AUDIO 500/1 monoblock subwoofer amplifier. In the event that your amplifier requires service.

The 12 o’clock position corresponds to 80 Hz, and is a good starting point for system tuning. • “PreamP outPuts” remote leVel Control The T2-500.1 incorporates a preamp output The T2-500.1 includes a remote level control section, designed to make multiple amplifier that can be mounted in the front of the vehicle. Systems easy to set up. This section consists. • 3Ω 35.5 V 2Ω 31.5 V Total Mobile Audio aPPendix b: t2-500.1 specifications general specifications: Recommended Fuse Value: 60A Recommended Fuse Type: ANL at battery, 4x 15A ATC fuses on amplifier chassis. Input section: Low-Level Input: Single-ended with RCA jacks. • aPPendix C: troublesHooting “How do i properly set the input sensitivity on my amplifier” Please refer to Appendix A (page 12) to set the input sensitivity for maximum, low-distortion output.

“my amplifier doesn’t turn on” Check the fuse, not just visually, but with a continuity meter. It is possible for a fuse to have poor internal connections that cannot be found by visual inspection. • Use this diagram to document your amplifier’s switch and control positions. Preamp Amplifier Outputs Inputs Remote LEFT LEFT Level Port Power Reversed Normal Output Polarity +12dB Input Sens. LP Filter Frequency (Hz) Bass Boost a JL Audio® Company RIGHT RIGHT Total Mobile Audio. • (do not send product for repair to this address) Products purchased outside the United States of America are covered only by that country’s distributor and not by Total Mobile Audio / JL Audio, Inc.

Free Football Prediction Software. Printed in China 9:00 AM – 5:30 PM (Eastern Time Zone) total mobile audio / Jl audio, inc 10369 North Commerce Pkwy.